Installing a New Wooden Sign

After months of anticipation, you have acquired a meticulously crafted wooden sign from Calico Carvers. While these exceptional wooden signs from Southern California are merely slabs of wood until mounted, the installation process is relatively straightforward.

Regardless of your familiarity with carpentry, we are confident in our ability to guide you through the installation process and ensure that your new wooden sign provides years of enjoyment.

To facilitate this endeavor, we have compiled a comprehensive guide that will provide you with the necessary knowledge to hang your custom wooden signs, whether indoors or outdoors. By the conclusion of this article, you will be proudly displaying your Calico Carvers creation for all to appreciate. Rest assured that our methods are both time-tested and secure.

Proceed with the guide to embark on your journey of showcasing your wooden signs at home.

 

How to Hang a Wooden Sign Indoors

Numerous popular signs, including our children’s sign, are suitable for indoor decoration. To commence the hanging process, you will require a few essential supplies.

Gather the following items:

• • A hammer
• • A nail
• • A wall hanger (also known as a picture hanger)
• • A tape measure
• • A pencil

A wall hanger is commonly found at hardware stores and comes in various sizes. Select the appropriate hanger to support the weight of your sign.

Utilize a pencil and tape measure to determine the    your sign on the wall. Typically, our customers opt to hang their sign centrally on the wall. Measure the wall from end to end and mark the halfway point with a pencil, indicating the desired position for the top of the sign. 

Next, utilize a tape measure to determine the distance between your hanger and the top of the sign, which is typically less than an inch. Create a mark below the existing mark on the wall at that distance from the first mark. The second mark is where you will carefully hammer your nail into the wall.

From there, all that remains is to hang the sign on the nail! If you measured accurately, it should be perfectly centered. You may need to adjust the position to ensure it sits level.

Congratulations on your hard work!

 

How to Hang a Wooden Sign Outdoors

If you desire for your new sign to be admired by the world, consider hanging it outdoors! An exterior wooden sign is an aesthetically pleasing way to enhance the character of your home and serve as a landmark for visitors.

Depending on whether you intend to mount your sign directly on a building or a dedicated signpost, you will require a distinct technique. Here are our most effective tips for swiftly securing your sign in any desired location:

 

Mounting on a Wall, Fence, or Object

If you wish to affix your sign directly to a building, the most suitable approach is to predrill the corners. Utilizing a countersink bit will ensure that the screw heads remain flush with the sign. Subsequently, you can drill your sign directly into the wall or fence where you desire it to be suspended.

 

Mounting to a Post

Mounting a signpost is the most intricate method for displaying your sign, but we find its aesthetic appeal compelling. If you intend for your sign to stand independently in an open space, the additional effort is undoubtedly worthwhile!

When selecting your post, ensure that it exceeds your initial estimation of its length. Remember that you will be burying a portion of the post in the ground and covering its top with the sign. The optimal height range is between three and five feet, contingent upon the height of your plants. 

When commencing the installation of a signpost, ensure that the hole is three times the width of the post and approximately one to two feet deep. Initially, the hole may appear extensive, but rest assured. Set the post in the hole and verify its placement before filling it in.

For a permanent signpost that can withstand environmental conditions, fill the hole with concrete to immobilize the post. For a less permanent sign, fill the hole with soil and rocks.

Next, predrill holes to facilitate direct screwing of the sign to the post, as outlined previously. If desired, a decorative post-topper can be added for aesthetic enhancement.

 

Utilizing a Sign Hanger

Pre-constructed signposts, crafted from diverse materials, are available for purchase. For a freestanding signpost, simply hammer the stake directly into the ground. Hang the sign from the post by installing eyehooks.

Wrought-iron sign hangers, crafted from high-quality materials, can be directly drilled into trees outside your home or business. Hang the sign from the hanger by installing eyehooks at the upper corners.

 

Display Your New Wood Sign

Ultimately, your newly acquired wood sign from Calico Carvers serves a singular purpose: to captivate and delight those who encounter it. Once securely installed, it will provide years of enjoyment. The sooner you embark on the installation process, the sooner you can admire your creation.

Given your inclination towards decoration, consider acquiring another of our renowned wood signs to complement your collection. These signs serve as ideal centerpieces for wall collages, enhancing the visual appeal. Explore our classic redwood signsto discover your preferred selection.